|Features at a Glance
The ISCAN-6 scanner is the first scanner to incorporate
miniature 24V DC motors and encoders into an XY manual scanner. This unique capability
allows three modes of scanning, XY manual, XY motorized, and XY hybrid.
This new hybrid
mode allows the operator to guide the transducer through the scan stroke by hand with
quick motorized indexing at the end of each stroke. The scanning mode is useful when
proper coupling can only be achieved by hand.
A very flexible system can be configured by adding
ultrasonic hardware and software, such as the PCUS 10/11 ultrasonic cards and CPS or
Winspect® data acquisition and analysis software. Eddy current inspections can
also be performed by adding suitable (PC-based) eddy current components.
Technical Data (ISCAN-6.1):
- The scanner is suitable for
automated and/or semi-automated scanning of flat or cylindrical components with
diameters of 8" and larger.
Scanner tracks are available in
lengths of 320mm (12.8") with a usable scanning length of 300mm (12").
Other track lengths are available upon request. Tracks
can be delivered as magnetic tracks, suction-cup tracks, or strap-on stainless steel
tracks. Scanner arms are available in lengths from 200mm to 500mm.
The motor/encoder/gear-box unit is
24 V, DC servo motors, 3.2W, 7250 RPM
Quadrature encoders, resolution 0.037mm/pulse for track (index) direction, 0.024mm/pulse
for arm (scan) direction
Anodized aluminum construction
approx. 2kg (4.4 lbs.)
400 x 140 x 60mm (15.8" x 5.5"x 2.4") without track
130 x 100 x 60mm (5.1" x 3.9" x 2.4")
- Interface to Controller:
Direct connection to the Galil DMC1700 series controller cable or any controller providing
a ±10V servo command signal
±24VDC @ 2A protected by current limiting (adjustable) and thermal shutdown
Click any image to